Loading icon
Post banner image

Currently, any driver probably knows that if the amount of lubricant in the engine is less than the minimum, the car cannot be operated. Before starting the engine, you need to fill in the required amount of oil fluid.

An insufficient amount of motor oil leads to poor lubrication of the power unit parts, therefore, they will wear out quickly. As a result, this will result in expensive internal combustion engine repairs.

Excess oil in the engine also does not lead to anything good. The lubricant level should be between the minimum and maximum marks. What happens if you pour oil into the engine?

  • Overflow of lubricant
  • Procedure
  • Through the hose
  • Through the drain hole
  • Through the probe tube
  • Reasons for transfusion

  • Overflow of lubricant

    Not every car owner understands what will happen if you overfill the oil. A lot of people think that the main thing is to add more lube. Increased fuel consumption is the first sign that the engine oil level is higher than normal.

    First of all, this is due to the fact that an excessive amount of oil in the internal combustion engine prevents the pistons in the cylinder block from working. Consequently, the work of the leading crankshaft is deteriorating.

    To overcome the additional resistance, the engine must operate with much more power. The car owner, noticing that the car is going slower, presses the gas harder. Because of this, more gasoline is consumed. This is the main thing that threatens to overflow oil.

    Check the oil level every day

    It must be said that increased fuel costs are the most harmless of the consequences that result from an increased level of lubrication. What is the danger of overfilling oil, besides this?

  • Increased formation of carbon deposits in the power unit of the car. Nagar appears not only in the piston system, but also in the combustion chambers.
  • The muffler quickly becomes dirty, therefore, its operational period is reduced.
  • An increase in the amount of exhaust emissions emitted by cars into the air. They become more toxic. Therefore, if you know that the volume of oil in the engine is above the level, and your car is indoors, try to go there as little as possible.
  • Increased lubrication costs.
  • Breakage of oil seals (car oils simply squeeze them out).
  • Lubricating spark plugs. If they are always in oil liquid, their service life will be reduced by 2 times.
  • Might be interesting: Changing the oil fluid in the Daewoo Nexia engine

    Why can the amount of lubricant in the internal combustion engine be higher than the maximum? First of all, this is a transfusion that occurred due to the carelessness of the car owner. Not everyone can fill in exactly as much lubricant as needed; sometimes they pour oil into the engine.

    Also, if the oil level on the scale differs from normal, it means that water or condensate has entered the engine (through the filler hole, dipstick). Sometimes gasoline penetrates into the engine through a leaky gas pump lining. Fix the issue when gasoline in the oil, you can replace the lining.


    What to do if you spilled oil? Some motorists believe that if the oil level exceeds the norm, then it will leak through the sump (in the deplorable state of the rubber seal). There are other ways that you can drain a lot of oil.

    Through the hose

    Prepare a hose and a container for excess grease.

  • Open the hood of the car, find the lid through which the oil product flows into the internal combustion engine.
  • Take an ordinary rubber hose and a container for draining excess oil.
  • Suck out a few glasses of oil (by mouth, pump), check how high its level is in the engine.

  • Through the drain hole

    What to do if the oil level is above normal? Drain all grease, then pour in the correct amount. You will need a container and a rag. Depending on the design of the engine, a wrench may be useful to unscrew the drain cap.

    It is advisable to call on a flyover or in a garage with a pit. If the car has been started before, the engine has warmed up, let it cool down. Otherwise, the grease will burn you.

  • Open the hood, unscrew the filler cap.
  • Get under the car and find the drain.
  • Place a previously prepared container under the drain.
  • Unscrew the cover with a wrench (or a hand with a rag wrapped around it).
  • Wait half an hour for the oil to drain into the container.
  • Screw on the drain cap.
  • Fill the motor with as much lubricant as needed.
  • Might be interesting: Changing the lubricant in the rear axle gearbox

    Through the probe tube

    It is necessary not only to know the dangers of oil overflow into the engine, but also to understand what to do if the optimal amount of lubricant is exceeded. It is possible to drain excess oil using a special dipstick.

  • Prepare a medical dropper, syringe.
  • Take the tube from the dropper.
  • Put it on the syringe.
  • Open the hood. Remove the dipstick, insert the tube, fill the syringe.
  • Drain the collected car oil into the container.
  • Repeat filling and draining the syringe several times.
  • We must not forget what will happen if you pour oil into the engine, fix the problem in time.

    If you do not pay attention to the fact that the oil level in the power unit is higher than normal, you may soon encounter serious vehicle malfunctions that will lead to expensive repairs.

    Reasons for transfusion

    Before pouring a new consumable, you need to find out what the automaker's recommendations are regarding the optimal amount of lubricant. This is an average value, you can't go wrong if you pour a little more or less liquid.

    It is necessary to take into account the conditions under which the oil is replaced. If the engine is cold, after filling the lubricant level will be less than when the engine heats up to a high temperature.

    If you are replacing without a lift, overflow may occur due to the tilt of the front or rear of the car in any direction. When pouring oil from a large canister, it is possible not to calculate the volume and pour a little.

    Also, the reason may be poor tightness of the fuel pump lining. Fuel passes through the lining and mixes with the oil.

    This leads to an increase in its level. This can be detected quite easily. You just need to smell the grease on the dipstick. If it has fuel in it, it will smell like it.